Connect with us

Hi, what are you looking for?

Latest

What’s the Best Wireless Ethernet Bridge?

Have you ever looked at one of your Ethernet devices and thought about connecting it to the Internet? Maybe the idea of dragging meters of cable around the house put you off?

First selection: Wi-Fi bridges

There’s more on the decks downstairs. The links above will take you to the Amazon.

Or maybe you have problems with the WiFi signal in some parts of your home, you have thought about creating a new network but don’t want it to be disconnected from your existing network?

If that’s the case, the wireless bridge could be the solution! To find out more about what they are and what they do, you can continue reading.

Why use a wireless Ethernet bridge?

The bridge is a really useful device that has two main applications.

 

The first use is to connect two wireless networks into one large network. This allows you to greatly increase the range of your network without the signal problems that can occur when using a wireless repeater.

By connecting two networks, all devices in one network can see and interact with devices in the other network. You can also share applications and devices such as the Internet, printers and scanners over two networks.

Wireless bridges are mostly used for this purpose in large buildings such as schools and offices. However, if you have problems with your wireless signal at home, this can be a good way to extend your network to more customers.

The second use of the wireless gateway (and this is what we focus on today) is connecting devices that only have an Ethernet connection to a wired network. If you have devices such as Blu-ray players or game consoles that only have an Ethernet connection, you can simply use that Ethernet connection to connect to the gateway and then use the gateways’ wireless capabilities to connect to the network.

In this way, these devices can be connected without having to reconnect the house or pulling cables throughout the house. There is also the advantage of convenience. If you only need to move the device for Ethernet, all you have to do is move the bridge with the device to stay connected.

Deck length explanation

How do I set up a Wi-Fi bridge?

Fortunately, setting up a wireless bridge is actually one of the simplest tasks in a home network.

Use of WDS to bypass

  1. Most modern routers and bridges will be equipped with a Wifi Protected Setup (WPS) function. This allows you to connect devices to a secure network without having to enter a password by simply pressing a button on the router.
  2. If your devices allow it, simply configure the gateway to access the wireless network, connect to the device you want to connect to the network via Ethernet, and then press the WPS button on the router and gateway.
  3. This automatically connects your bridge to your router and thus to your network.

Keep in mind that SPF can be unsafe and you may be exposed to attacks. Use caution when using this function.

For more information, click here.

Manual bridge

If your router or gateway does not have this feature, you will need to connect your router to your computer via Ethernet and manually connect to the wireless network. In fact, given the security problems with WDS, it is often the preferred option.

  1. Once you have connected the router to your computer, simply enter the IP address of the gateway into your web browser to access the configuration page.
  2. Go to the bridge. Check the connection details in the manufacturer’s manual. If they’ve changed and you don’t know them, you can drop off the bridge at the factory.
  3. From there you need to find your network and connect to it by entering your Wi-Fi password.

The next step is also very simple. Now that your Bridge is connected to the network, all you have to do is connect an Ethernet cable between the Bridge and the Ethernet device. This gives the device access to your network!

If your bridge has only one Ethernet port, but you need to connect multiple devices, you should consider purchasing a switch. The switch has several Ethernet ports. This takes your single Ethernet connection and allows you to connect multiple devices. You can spend a lot of money on it, or you can spend a little. Many people can operate the uncontrolled main switch.

Is there an old router? You can try!

Although many parts of your home network can be quite expensive, you can actually connect your network to an old router for free!

Even though it’s not as simple as using a special bridge, the fact that it’s worthless can be more than makeup.

Make sure your router supports bridges. Each manufacturer and model can be configured in different menu ranges. In general, this option is likely to be found under Settings or Wireless Settings.

Another option (which is slightly more complicated) is to replace the router firmware with a Linux firmware called DD-WRT. It’s not the right way to go if you’re not sure about the technology. Incorrect installation of the DD-WRT may render the old router unusable.

You can then access the router’s menu by connecting to a PC and then changing the settings in the DD-WRT menu to turn it into a wireless client bridge. You also need to change the settings for the firewall, DHCP and other wireless networks. The following video helps with the explanation.

Simply connect the converted router wirelessly to your network and then connect it to the device you want to bypass with an Ethernet cable!

Video Demonstration of DD-WRT Wireless Bridge Connection

Best 3 Bridge Wireless Ethernet

1. EZ-Bridge-Lite EZBR-0214+ point-to-point bridge

 

 

>> Click here to read customer reviews and learn more about Amazon.

  • Connect networks up to 3 miles apart under ideal conditions.
  • It comes with two bridges so you can connect two wireless networks right out of the box.
  • The installation is very simple and multiple bridges can be connected.

The EZ-Bridge-Lite EZBR-0214+ is designed for transport over long distances. The installation is quite simple and can be done by a person who does not have much experience in networking.

If you just want to connect a few pure Ethernet devices wirelessly, this product will do the same, although you can find products that do their job over short distances at a lower price. If you need to connect remotely, this is not a bad choice.

2. Edimax CV-7428nS N300 Wireless Media Bridge

 

>>> Click here for more information <<

  • Perfect for connecting only Ethernet devices to a Wi-Fi network
  • The WPS can be set up at the touch of a button to connect to the network quickly and easily.
  • Wireless 802.11n connection at 300 Mbps.
  • 5 Ethernet ports for multiple connections to a single box.

It is the ideal bridge to connect Ethernet devices to the internal wireless network. It has five Ethernet ports, which means you can connect your DVD player, TV, console and more with a single bridge.

It is easy to set up and install with the WPS button and has two antennas for good radio coverage.

3. TP-Link TL-WA801ND Wireless Access Point N300/bridge

 

 

>> Click here to read customer reviews and learn more about Amazon.

  • Acts as a wireless access point, wireless repeater and wireless bridge.
  • 802.11n wireless and 2 antennas.
  • Economical solution compared to the other devices on the list.

It is a versatile product that can be used for a number of different functions, including a wireless access point, a repeater and a bridge.

Despite these additional advantages, it is a very economical product and a useful way to connect your network in small delivery areas at low cost. However, because of their many applications, the similarity may be slightly more problematic than some of the other bridges on this list.

It also lacks some of the more advanced features such as WPS, multiple Ethernet ports or a particularly powerful signal section.

Short packaging

Wireless bridges are an excellent way to connect two networks or pure Ethernet devices.

They are a simple and inexpensive solution to a network problem, and maybe even cheaper if you already have an old router in your house.

I hope you enjoyed our article on wireless bridges! If so, please let us know. If you have any questions, you can also comment below.

 

 

 best point to-point wireless bridge 2019,wifi bridge

You May Also Like